Markets Served: Factory Automation, Food Processing & Packaging, Materials Handling & Printing & Die Cutting
TSC CLUTCHES
- Air actuated clutch
- Pilot mount integral mount (backplate/sheave) models
- Mid shaft or end shaft mounting
- Straight bores
- Compact design
- Permanently lubricated earings
- High temperature sealing o-rings
- Torque range from 90 in/lbs to 2400 in/lbs
- Standard bore sizes from .625” to 1.625”
TSC THROUGH SHAFT MOUNTED CLUTCHES
All UC products use O-rings as dynamic seals, therefore adequate lubrication must be provided in the actuating air circuit to ensure these O-rings do not run dry.
CARLSON TSC PNEUMATIC CLUTCH designed for MID SHAFT OR END SHAFT APPLICATIONS requiring a bearing mounted sprocket or sheave. When air pressure between 15 PSI and 80 PSI is applied to the inlet port, the bearing mounted backplate is coupled to the shaft. The engagement forces are transferred from the stationary cylinder to the rotating clutch plates through permanently lubricated bearings so no swivel union is required. The TSC unit is offered in a PM MODEL for bolt on attachment of a sheave or sprocket. An IM MODEL is also available which has V grooves machined into the backplate, These units are BORED TO SIZE so no bushing is required for mounting to the shaft. The models feature a SMALL COMPACT DESIGN with two friction surfaces that transmit HIGH TORQUE, ranging from 60 in/lbs. to 850 in/lbs. Standard bore sizes from .500″ to 1.625″.
| STANDARD BORE SIZES FOR TSC MODELS | |||
|---|---|---|---|
| MODEL | ASSEMBLY | BORE | KEYWAY |
| TSC60 | -2 | .625 | 3/16 X 3/32 |
| TSC150 | -1 -2 | .750 .875 | 3/16 X 3/32 |
| TSC350 | -1 -2 -3 | .875 1.000 1.125 | 1/4 X 1/8 |
| TSC850 | -0 -1 -2 -3 -4 | 1.125 1.250 1.375 1.500 1.625 | 1/4 X 1/8 1/4 X 1/8 5/16 X 5/32 3/8 X 3/16 3/8 X 3/16 |
| MODEL | TSC60IM | TSC150IM | TSC350IM | TSC850IM |
|---|---|---|---|---|
| A | 2 3/4 | 3 5/8 | 4 1/4 | 5 1/4 |
| B | 3 | 4 | 4 1/2 | 5 5/8 |
| C | 2 7/8 | 3 21/32 | 4 1/2 | 5 5/16 |
| D | 35/64 | 21/32 | 21/32 | 29/64 |
| E | 1G3V | 1G3V | 2G3V | 3G3V |
| MAXIMUM RPM ALL UNITS 1800 | ||||
| TSC REPAIR KITS | ||||
|---|---|---|---|---|
| KIT CONTAINS - Retaining Rings, Bearings, O-Rings, Clutch Disc, Friction Lining, Springs | ||||
| MODEL | 60IM and PM | 150IM and PM | 350IM and PM | 850IM and PM |
| PART NUMBER | 4228K | 4179K | 4175K | 4182K |
| MODEL | TSC60IM | TSC150IM | TSC350IM | TSC850IM | |
|---|---|---|---|---|---|
| TORQUE @ 80PSI | STATIC | 60 IN-LB | 150 IN-LB | 350 IN-LB | 850 IN-LB |
| DYNAMIC | 50 IN-LB | 125 IN-LB | 285 IN-LB | 700 IN-LB | |
| HEAT CAPACITY | 7,500 FT-LB | 15,000 FT-LB | 30,000 FT-LB | 60,000 FT-LB | |
| HEAT DISSIPATION WITH BACKPLATE @ 1800 | .10 HP | .14 HP | .22 HP | .50 HP | |
| WK^2 BACKPLATE | .95 IN^2LB | 3.9 IN^2LB | 12.4 IN^2LB | 39.5 IN^2LB | |
| WK^2 HUB AND CLUTCH DISC | .65 IN^2LB | 2.3 IN^2LB | 1.9 IN^2LB | 8.5 IN^2LB | |
| WEIGHT | 3 1/4 LB | 7 LB | 9 LB | 23 LB | |
Lubricated Air Required
Dimensions shown are for general information only.
Certified prints will be furnished upon request for design and installation purposes.