Markets Served: Factory Automation, Forestry, Materials Handling & Metals
Heavy Duty Industrial Air Clutches
- Two friction surfaces
- Greater torque capacity
- Low inertia design
- High temperature air diaphragm
- Quick engagement and disengagement
- Easy adjustment for lining wear
HIGH TEMPERATURE DIAPHRAM CLUTCH
MODEL PM (Pilot Mount) – Carlson pilot mount clutches are available in sizes from 8.5 to 25 inches in diameter. The model PM is a self-contained, bearing mounted clutch designed for mounting on the end of a shaft. This model consists of a finned pressure plate, torque assembly, adapter shaft that is bored to fit the customer’s shaft and a bearing mounted pilot backplate for mounting a sheave, sprocket, gear, etc.
{For PM sizes 8.5 through 14 Click Here}
| MODEL | 16PM3 | 18PM3 | |
|---|---|---|---|
| A | 17.87 | 19.87 | |
| B | 10.50 | 10.50 | |
| C | 9.50 | 9.50 | |
| D - BORE | Min. | 2.75 | 2.75 |
| Max. Standard Keyway | 3.250 | 3.250 | |
| Max. Shallow Keyway | 3.563 | 3.563 | |
| E | 1.31 | 1.31 | |
| F | 5.53 | 5.53 | |
| G | 8.87 | 8.87 | |
| H | 2.75 | 2.87 | |
| J | 3.00 | 2.87 | |
| K | 7/16”-14 | 7/16”-14 | |
| L | 8.50 | 8.50 | |
| LOCK COLLAR* | 2295-3 | 2295-3 | |
| Weight Lbs. Approx. | 215 | 250 | |
| MODEL | 16 | 18 |
|---|---|---|
| TORQUE IN-LBS** @ 60 PSI LOCO LINING | 11792 | 19090 |
| TORQUE IN-LBS** @ 80 PSI STANDARD LINING | 48196 | 77684 |
| MAXIMUM RPM | 2200 | 2000 |
| REPAIR KITS | ||
|---|---|---|
| HARDWARE KITS CONTAINS - CAPSCREWS, LOCKWASHERS, SPACERS, ADJUSTMENT SPACERS |
||
| SIZE | 16 | 18 |
| PART NUMBER | 4014-5 | 4014-6 |
| CENTERING MECHANISM KITS CONTAINS - LOCKNUTS, STUDS, SPRINGS, SCREWS, LOCKWASHERS, CENTERING MECHANISM BRACKETS |
||
| SIZE | 16 | 18 |
| PART NUMBER | 4013-6 | 4013-6 |
Dimensions shown are for general information only.
Certified prints will be furnished upon request for design and installation purposes.